![]() I was able to mount the display board to the Pi's case stand-offs, which let everything be more compact than it otherwise would have. I used electrical tape to hold the main ribbon that comes from the screen to the first board that handles touch control and then the other ribbon cable, which runs between the two boards I carefully rolled up to get the HDMI port to come out in the orientation that I wanted it to be in. Putting this all together was a bit difficult because of the ribbon cables between the control boards for the touch screen. ![]() The two cameras are mounted adjacent to each other on the inside of a aluminum box which houses the Raspberry Pi controller and. The Raspberry Pi is connected to a PiCamera V2 visible camera and the FLIR Lepton 3 thermal camera. Now I want to experiment with lower capacity banks and different project use cases.hmm. The VIS+LWIR camera is built around the a Raspberry Pi Zero W board which serves as the main controller of the camera. It seems that one charge can provide many hours of use. ![]() ![]() I didn't expect it to work since SBCs can often be picky about power delivery, especially with additional peripherals but I was pleasantly surprised when not only was the battery bank providing an appropriate power draw but it was also lasting a really long time. Out of pure curiosity I tried powering the Pi and screen with my battery bank that I use for my cell phone. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |